VF 45KW Clean Gas Oil free Permanent Magnet VF Laser Special Air Compressor

The working principle of laser cutting air compressor is based on Bernoulli principle and Pascal principle. Impurities in the air are filtered through an air filter. The compression motor compresses the air through electromagnetic action. The pressure regulating device adjusts the air pressure. The cooling device ensures the temperature of the compressed air. Finally, the power supply provides power to deliver high-pressure air to the laser cutting machine. This design has the advantages of high working pressure, stable pressure, high air purity, and low noise, which can provide stable, efficient, and high-quality air supply for laser cutting machines, thereby improving the cutting quality and efficiency of laser cutting machines. ‌

Working principle of laser cutting air compressor

• Filtering impurities in the air: The air first passes through an air filter, filtering out harmful substances such as dust, grease, rust, and moisture.
• Compressed air: The compression motor compresses filtered air through electromagnetic action.
• Adjust air pressure: Compressed air enters the pressure regulating device and is adjusted to the desired pressure.
• Cooling high-pressure air: The cooling device cools the high-pressure air to ensure its temperature.
• Power supply: The power supply provides power to the air compressor, delivering high-pressure air to the laser cutting machine.
• Advantages of laser cutting air compressor
• High work pressure: able to provide stable high-pressure air.
• Stable pressure: Ensure the stable operation of the laser cutting machine.
• High air purity: filters out impurities and provides pure compressed air.
• Low noise: The design reduces the generation of noise.

Its installation environment requires low relative humidity, less dust, clean air, and good ventilation. Keep away from harmful, flammable, explosive, corrosive chemicals and unsafe items, and avoid approaching dusty areas.

When installing, the temperature of the laser cutting dedicated air compressor should be higher than 5 degrees Celsius in winter and lower than 40 degrees Celsius in summer, because the higher the ambient temperature, the higher the temperature of the air compressor, which may affect the performance of the compressor. If necessary, ventilation or cooling devices should be installed during installation.

If the factory environment is poor and dirty, it is necessary to install equipment pre filters.

Only one emptying press can be used for installation and laser cutting.

Reserve a channel. Conditional installation of overhead cranes for maintenance, upkeep, and laser cutting specialized air compressor equipment.

To maintain the space for maintenance, the distance between the laser cutting dedicated air compressor and the wall should be at least 1m, in preparation for the maintenance space.

The space for installing cooling pipes should be planned from the top of the laser cutting dedicated air compressor and should be at least 1m higher than the top of the laser cutting dedicated air compressor

Through the above working principles and advantages, laser cutting air compressors can effectively improve the cutting quality and efficiency of laser cutting machines, meeting the requirements of high-precision and high-efficiency cutting.