スクリューコンプレッサーを始動する前の準備作業はお済みですか？

12月 13, 2024

What preparations should be made before starting the ロータリースクリューエアコンプレッサー? The following tells you the starting steps of Sparta brand screw compressor
（1）Check whether there are some objects in the air compressor. During transportation, in order to save transportation space, our company usually puts the maintenance filter element and accessories in the compressor. After the customer receives the compressor, should first take out these spare parts.
（2）Select the correct circuit breaker and wires, confirm that the power supply is connected correctly and the indicator light is on.
What should do if the controller displays “phase sequence error” or “motor unbalanced” after connecting to the power supply?
Cut off the power, swap any two fire wires, then reconnect the power supply and restart to return to normal.
（3）Check the air compressor oil level. Before starting, the air compressor oil level should be higher than the red warning line above. After starting, the air compressor oil level should be between the two red warning lines.

Usually, before Sparta compressor shipped, each machine will make strict testing, air compressor oil has been added, and customers can directly connect to the power supply for use. In order to avoid accidents, it is necessary to check whether the lack of air compressor oil before operation.
（4）Check if there any air, oil or water leaks at each connection part.
（5）Press the “Start” button. After starting, the “Start” indicator light should light up and the compressor will start running.
（6）The compressor automatically loads in about 2 seconds, the intake valve opens, and the exhaust pressure pointer of the oil and gas barrel rises.
（7）After starting the loading, check whether the oil level is within the normal range (before starting, the air compressor oil should be higher than the red warning line above, and after starting, the rotary screw air compressor oil level should be between the two red warning lines.) .
（8）Check if there any air, oil or water leaks at each connection part.