China industrial 20hp 10hp proveedores secador de aire comprimido secador de aire refrigerado
Modelo(Entrega aérea):1m³,2m³,3m³,6m³,8m³,10m³,13m³,15m³,20m³,25m³,30m³
Tipo de secador: Tubo simple; Tubo doble
Tipo de temperatura:Temperatura normal≤45℃; Alta tenmeratura≤80℃
Presión:Regular 10KG, Alta presión 16KG, 30KG
Garantía: un año para el secador de aire
Servicios: OEM&ODM
Air flow rate: 1.5m³/min
Pressure: 10bar
Interface size: ZG1″
Power: 0.5kw
Size: 665x425x560mm
Weight: 37kg
China industrial 20hp 10hp proveedores secador de aire comprimido secador de aire refrigerado
Product advantage
• Cold drying machine, suction dryer filter integrated, compact structure, easy to install and use;
• Good drying effect, dew point bottom, low regeneration gas consumption;
• The life of desiccant can be extended more than three times, saving maintenance costs;
• Adopt advanced SCM control technology to realize the automation of operation control.

The process flow of the combined compressed air dryer is shown in the figure. The hot and humid air from Tenor first exchanges heat with the cold air from the evaporator for cooling and initial dehumidification. Then it enters the evaporator for heat exchange with the refrigerant, and the air temperature further drops to 2-i(rc). At this temperature, most of the air moisture will be precipitated as liquid. And from the drain AE, the poured dry air from the evaporator to the precooler and the hot and humid air from the compressor for exchange, cold recovery. At the same time, its temperature is going up. From the refrigeration unit out of the air into the high efficiency oil remover, remove the impurities in the oil, into the adsorption unit wandering scale cut) depth drying, obtain a lower dew point temperature on tiptoes air into the precision filter to remove the fixed moment, into the subsequent process.

As a leading high-quality compresor de aire lubricado por agua sin aceite manufacturer and supplier We have:
1. Congelador Secador de Aire
2. The Adsorbed Compressed Air Dryer ( Heatless Purge, Externally Heated Purge )
3. Consumption Compression Heat Regeneration Type Dryer
4. Blast Regeneration Type Dryer
5. Low dew point Compress Air Dryer


Servicio posventa
- Cualquier pregunta o solicitud antes, durante o después de la venta, nos gustaría ayudarle en cualquier momento y le encontraremos la mejor solución en 24 horas.
- Garantia: Un año para toda la máquina Las piezas de repuesto originales se proporcionarán con el mejor precio.
- Hay servicio de maquinista a bordo.

Procut Model
Deje su mensaje
Productos relacionados




