Hot Selling Schraube Luftkompressor Luftrotor Komponente Kompressorkopf
Wartung und Instandhaltung
- Prüfen Sie täglich den Ölstand, die Abgastemperatur und den Abgasdruck und achten Sie auf ungewöhnliche Geräusche;
- Öffnen Sie jede Woche vor der Inbetriebnahme das Ablassventil des Abscheiders, um das Kondenswasser abzulassen, prüfen Sie, ob überall Lecks vorhanden sind, kontrollieren Sie das Sicherheitsventil und überprüfen Sie den Verschleiß des Riemens (visuell);
- Überprüfen Sie regelmäßig das Ansaugregelventil, das Mindestdruckventil, die Anschlussklemmen des elektrischen Schaltkastens, das Sicherheitsventil und das Kühlgebläse;
- Reinigen und kehren Sie den Kühler regelmäßig und prüfen Sie die Zuverlässigkeit des Sicherheitsventils;
- Wechseln Sie regelmäßig das Ölfilterelement, das Ölabscheiderfilterelement, das Ansaugfilterelement und das Schmieröl aus.
Purchase knowledge
Auspuffdruck
The higher the discharge pressure of the compressor, the more energy it consumes. The sum of pressure, pipeline resistance loss, and pressure drop of supporting equipment is set as the lower limit of the rated exhaust pressure for selecting a screw air compressor. Generally, the diameter of the gas pipeline should be selected larger to reduce resistance loss and achieve the goal of long-term operation and energy consumption reduction. The higher the discharge pressure of the compressor, the more energy it consumes. So do not use compressors with excessively high exhaust pressure
Exhaust volume
Calculate the coefficient of actual total gas consumption* 1.1-1.2 as the model for selecting exhaust volume. If the selected value is too low and cannot meet the specified value of gas equipment, and too high is selected, it will result in high energy consumption and uneconomical operation during load reduction. The cost of purchasing a large displacement screw air compressor is relatively high.
Compressed air quality
According to the requirements of the industry's gas equipment for compressor gas, screw air compressors and supporting equipment should be selected appropriately. The following points need to be considered:
- To reduce the oil content in compressed gas, a degreasing purifier can be used. If the treatment index is high, multi-stage treatment can be selected.
- To reduce the water content in compressed gas, water removal equipment can be used as a matching solution.
Wartung und Instandhaltung
- Prüfen Sie täglich den Ölstand, die Abgastemperatur und den Abgasdruck und achten Sie auf ungewöhnliche Geräusche;
- Öffnen Sie jede Woche vor der Inbetriebnahme das Ablassventil des Abscheiders, um das Kondenswasser abzulassen, prüfen Sie, ob überall Lecks vorhanden sind, kontrollieren Sie das Sicherheitsventil und überprüfen Sie den Verschleiß des Riemens (visuell);
- Überprüfen Sie regelmäßig das Ansaugregelventil, das Mindestdruckventil, die Anschlussklemmen des elektrischen Schaltkastens, das Sicherheitsventil und das Kühlgebläse;
- Reinigen und kehren Sie den Kühler regelmäßig und prüfen Sie die Zuverlässigkeit des Sicherheitsventils;
- Wechseln Sie regelmäßig das Ölfilterelement, das Ölabscheiderfilterelement, das Ansaugfilterelement und das Schmieröl aus.
Accessories classification
- Controller: computer board, relay board, PLC controller, controller, control panel box, operation panel box.
- Valves: solenoid valve, rotary valve, pneumatic valve, relief valve, temperature control valve, thermal control valve, temperature control valve core, proportional valve volume control valve, pressure maintenance valve, intake valve, safety valve, regulating valve, expansion valve, expansion valve, check valve, shuttle valve, pipeline filter, automatic drain valve, filter cup, pressure reducing valve, pressure regulator.
- Filters and oils: air filter, oil filter, fine oil filter, lubricating oil, pipeline filter, automatic drain valve, water filter cup
- Host -: Host (head), bearings, shaft seals, oil seals, shaft sleeves, gears, gear shafts, major repairs.
- Repair kit: main engine, unloading valve repair kit, pressure maintenance valve, rotary valve, temperature control valve core, intake valve, coupling elastic body and other repair kits.
- Cooling: fan, radiator, heat exchanger, oil cooler, rear cooler.
- Switches: pressure switch, temperature switch, emergency stop switch, differential pressure switch.
- Transmission: coupling, elastic body, plum blossom pad, elastic block, gear, gear shaft.
- Hoses: intake hose, high-pressure hose.
- Start panel: contactors, thermal protection, reverse phase protectors, wire harnesses, relays, transformers, etc.
- Buffer components: shock pad, expansion joint, expansion valve, elastic body, plum blossom pad, elastic block.
- Instruments: timer, temperature switch, temperature display, pressure gauge, pressure reducing gauge.
- Motor: permanent magnet motor, variable frequency motor, motor, motor.
Hinterlassen Sie Ihre Nachricht
Verwandte Produkte